Aix 6.1
IDS 11.70.fc3X9
I got the below message tonight in my online log. about 2 hours later I
got a second message showing that the snooping was complete and the users
were unblocked. What sort of thing might cause this to happen?
Peter
Peter Logan
Senior Database Administrator
Phone: 616/878-8309
----- Forwarded by Peter Logan/Corporate/Spartan on 05/05/2013 01:22 AM
-----
From: informix (spartan42) <informix@spartan42.spartanstore.com>
To: pdllogan77@yahoo.com, peter_logan@spartanstores.com,
Date: 05/04/2013 11:57 PM
Subject: Re:
Subject: ods_prd_tcp : Attention! : DDR Subsystem notification.
To: peter_logan@spartanstores.com
cc: pdllogan77@yahoo.com
DDR Log Snooping - DDRBLOCK phase started, userthreads blocked
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30194]
*******************************************************************************
CDR Issue
↧
↧
Re: CDR Issue
You are out of or cdr thinks you are close to being out of logspace
Cheers
Paul
Paul Watson
+1 913-387-7529
www.oninit.com
On May 5, 2013, at 0:26, "Peter_Logan@spartanstores.com"<Peter_Logan@spartanstores.com> wrote:
> Aix 6.1
> IDS 11.70.fc3X9
>
> I got the below message tonight in my online log. about 2 hours later I
> got a second message showing that the snooping was complete and the users
> were unblocked. What sort of thing might cause this to happen?
>
> Peter
>
> Peter Logan
> Senior Database Administrator
> Phone: 616/878-8309
> ----- Forwarded by Peter Logan/Corporate/Spartan on 05/05/2013 01:22 AM
> -----
>
> From: informix (spartan42) <informix@spartan42.spartanstore.com>
> To: pdllogan77@yahoo.com, peter_logan@spartanstores.com,
> Date: 05/04/2013 11:57 PM
> Subject: Re:
>
> Subject: ods_prd_tcp : Attention! : DDR Subsystem notification.
> To: peter_logan@spartanstores.com
> cc: pdllogan77@yahoo.com
>
> DDR Log Snooping - DDRBLOCK phase started, userthreads blocked
>
>
>
>
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30195]
*******************************************************************************
↧
Receiving Bad file number
IDS: 11.50.FC5
OS: SunOS 5.10
Could this be a bad network card?
SQL: New Run Modify Use-editor Output Choose Save Info Drop Exit
Modify the current SQL statements using the SQL editor.
---------- subsidyreporting@ifmx00307 ---------- Press CTRL-W for Help
--------
select * from ips_extract_number
25582: Network connection is broken.
Bad file number
Thanks,
***********
Ernie Knox
Sr. Technical Specialist, I&TG - IT Operations & Governance
Sears Holdings Management Corp
3333 Beverly Rd.
Hoffman Estates, IL. 60179
Office: (847) 286-5735
Email: Ernest.Knox@searshc.com<mailto:Ernest.Knox@searshc.com>
Blackberry:
2244650553@messaging.sprintpcs.com<mailto:2244650553@messaging.sprintpcs.com>
Informix Email: ifmxdba@searshc.com<mailto:ifmxdba@searshc.com> and Team:
InformixDBA@searshc.com<mailto:InformixDBA@searshc.com>
Informix Primary:
INFORMIXDBAPrimaryPager@searshc.com<mailto:INFORMIXDBAPrimaryPager@searshc.com>
Informix Secondary:
INFORMIXDBASecondaryPager@searshc.com<mailto:INFORMIXDBASecondaryPager@searshc.com>
MySQL Email: MYSQLDBAe@searshc.com<mailto:MYSQLDBAe@searshc.com> and Team:
MySQLDBA2@searshc.com<mailto:MySQLDBA2@searshc.com>
MySQL Primary:
MYSQLDBAPrimaryPager@searshc.com<mailto:MYSQLDBAPrimaryPager@searshc.com>
MySQL Secondary:
MYSQLDBASecondaryPager@searshc.com<mailto:MYSQLDBASecondaryPager@searshc.com>
For more information, view our DBA Wiki page link below:
http://wiki.intra.sears.com/confluence/display/TechStrag/Database+Management#DatabaseManagement<http://wiki.intra.sears.com/confluence/display/TechStrag/Database+Management>
" Yes we can make a Change! "" IF you can think it, you can do it! "" IT'S always a great day to watch Sports: FOOTBALL "
GSU
MISSION:
" The focus of my life begins at home with family, loved ones, and friends. I
want to use my resources to create a
secure environment that fosters love, learning, laughter, and mutual success.
I will protect and value integrity. I
will admit and quickly correct my mistakes. I will be a self-starter. I will
be a caring person. I will be a good listener
with an open mind. I will continue to grow and learn. I will facilitate and
celebrate the success of others. "
***********
This message, including any attachments, is the property of Sears Holdings
Corporation and/or one of its subsidiaries. It is confidential and may contain
proprietary or legally privileged information. If you are not the intended
recipient, please delete it without reading the contents. Thank you.
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30196]
*******************************************************************************
↧
write cron jobs to check status
Hi,
i need to write script and create cron job to check the informix server status
and need to email it to some one's email any one can help me to do this
Thanks
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30197]
*******************************************************************************
↧
RE: write cron jobs to check status
Hello.
You could easily get your Informix status from the output of "onstat -"
command.
Eg: in linux/unix boxes, you could check using:
onstat - |awk '{print $8}'
That should return "On-Line", in other case your system should not ready for
users sessions/applications.
http://pic.dhe.ibm.com/infocenter/informix/v121/topic/com.ibm.adref.doc/ids_adr_0489.htm?resultof=%22%73%65%72%76%65%72%22%20%22%73%74%61%74%75%73%22%20%22%73%74%61%74%75%22%20
Pay attention to single-user mode, while the engine is running, but not
available for non-administrative users.
Hope it helps.
Regards.
Alexandre Marini
IBM Informix Certified Professional v10 / v11.50 / v11.70
IBM Information Management Informix Technical Professional
IBM Infosphere DataStage Technical Professional
Informix Senior DBA - Orizon Brasil
BRIUG website administrator
Informix independent consultant
> To: ids@iiug.org
> From: pushpa@cybersoft.lk
> Subject: write cron jobs to check status [30197]
> Date: Mon, 6 May 2013 05:49:21 -0400
>
> Hi,
>
> i need to write script and create cron job to check the informix server
status
> and need to email it to some one's email any one can help me to do this
>
> Thanks
>
>
>
>
>
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30198]
*******************************************************************************
↧
↧
Re: RE: write cron jobs to check status
Hi,
thanks for the reply, what will happen when it down and how could know whether
it down or up and if down send a mail
thanks
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30199]
*******************************************************************************
↧
Re: write cron jobs to check status
Have a 5 min cron rub
onstat - | mail <whoever>
Cheers
Paul
Paul Watson
+1 913-387-7529
www.oninit.com
On May 6, 2013, at 5:53, "PUSHPA KUMARA"<pushpa@cybersoft.lk> wrote:
> Hi,=20
>=20
> thanks for the reply, what will happen when it down and how could know whe=
ther=20
> it down or up and if down send a mail=20
>=20
> thanks=20
>=20
>=20
> **************************************************************************=
*****=20
> =20
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30200]
*******************************************************************************
↧
Re: Receiving Bad file number
If it is then will be something in the message log
Cheers
Paul
Paul Watson
+1 913-387-7529
www.oninit.com
On May 6, 2013, at 2:49, "Knox, Ernest"<Ernest.Knox@searshc.com> wrote:
> IDS: 11.50.FC5=20
> OS: SunOS 5.10=20
>=20
> Could this be a bad network card?=20
>=20
> SQL: New Run Modify Use-editor Output Choose Save Info Drop Exit=20
> Modify the current SQL statements using the SQL editor.=20
>=20
> ---------- subsidyreporting@ifmx00307 ---------- Press CTRL-W for Help=20
> --------=20
>=20
> select * from ips_extract_number=20
>=20
> 25582: Network connection is broken.=20
> Bad file number=20
>=20
> Thanks,=20
>=20
> **************************************************************************=
****************=20
> Ernie Knox=20
> Sr. Technical Specialist, I&TG - IT Operations & Governance=20
> Sears Holdings Management Corp=20
> 3333 Beverly Rd.=20
> Hoffman Estates, IL. 60179=20
> Office: (847) 286-5735=20
> Email: Ernest.Knox@searshc.com<mailto:Ernest.Knox@searshc.com>=20
> Blackberry:=20
> 2244650553@messaging.sprintpcs.com<mailto:2244650553@messaging.sprintpcs.c=
om>=20
> Informix Email: ifmxdba@searshc.com<mailto:ifmxdba@searshc.com> and
Team:=20=
> InformixDBA@searshc.com<mailto:InformixDBA@searshc.com>=20
> Informix Primary:=20
> INFORMIXDBAPrimaryPager@searshc.com<mailto:INFORMIXDBAPrimaryPager@searshc=
..com>=20
> Informix Secondary:=20
> INFORMIXDBASecondaryPager@searshc.com<mailto:INFORMIXDBASecondaryPager@sea=
rshc.com>=20
> MySQL Email: MYSQLDBAe@searshc.com<mailto:MYSQLDBAe@searshc.com> and Team:=
=20
> MySQLDBA2@searshc.com<mailto:MySQLDBA2@searshc.com>=20
> MySQL Primary:=20
>
MYSQLDBAPrimaryPager@searshc.com<mailto:MYSQLDBAPrimaryPager@searshc.com>=20=
> MySQL Secondary:=20
> MYSQLDBASecondaryPager@searshc.com<mailto:MYSQLDBASecondaryPager@searshc.c=
om>=20
>=20
> For more information, view our DBA Wiki page link below:=20
>=20
> http://wiki.intra.sears.com/confluence/display/TechStrag/Database+Manageme=
nt#DatabaseManagement<http://wiki.intra.sears.com/confluence/display/TechStr=
ag/Database+Management>=20
>=20
> " Yes we can make a Change! "=20
> " IF you can think it, you can do it! "=20
> " IT'S always a great day to watch Sports: FOOTBALL "=20
> GSU=20
> MISSION:=20
> " The focus of my life begins at home with family, loved ones, and friends=
.. I=20
> want to use my resources to create a=20
> secure environment that fosters love, learning, laughter, and mutual succe=
ss.=20
> I will protect and value integrity. I=20
> will admit and quickly correct my mistakes. I will be a self-starter. I wi=
ll=20
> be a caring person. I will be a good listener=20
> with an open mind. I will continue to grow and learn. I will facilitate an=
d=20
> celebrate the success of others. "=20
>=20
> **************************************************************************=
****************=20
>=20
> This message, including any attachments, is the property of Sears Holdings=
=20
> Corporation and/or one of its subsidiaries. It is confidential and may con=
tain=20
> proprietary or legally privileged information. If you are not the intended=
=20
> recipient, please delete it without reading the contents. Thank you.=20
>=20
>=20
> **************************************************************************=
*****=20
> =20
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30201]
*******************************************************************************
↧
RE: Receiving Bad file number
It seems you are hitting some OS limits.
Check your machine notes for OS patch levels, OS prereqs (kernel parameters),
if you are fine according to recommendations, ask us for any additional help.
Remember that 11.50 is an old version, you should always consider upgrading
options, to get the latest features, and better performance.
Regards.
Alexandre Marini
IBM Informix Certified Professional v10 / v11.50 / v11.70
IBM Information Management Informix Technical Professional
IBM Infosphere DataStage Technical Professional
Informix Senior DBA - Orizon Brasil
BRIUG website administrator
Informix independent consultant
> To: ids@iiug.org
> From: Ernest.Knox@searshc.com
> Subject: Receiving Bad file number [30196]
> Date: Mon, 6 May 2013 03:49:54 -0400
>
> IDS: 11.50.FC5
> OS: SunOS 5.10
>
> Could this be a bad network card?
>
> SQL: New Run Modify Use-editor Output Choose Save Info Drop Exit
> Modify the current SQL statements using the SQL editor.
>
> ---------- subsidyreporting@ifmx00307 ---------- Press CTRL-W for Help
> --------
>
> select * from ips_extract_number
>
> 25582: Network connection is broken.
> Bad file number
>
> Thanks,
>
>
***********
> Ernie Knox
> Sr. Technical Specialist, I&TG - IT Operations & Governance
> Sears Holdings Management Corp
> 3333 Beverly Rd.
> Hoffman Estates, IL. 60179
> Office: (847) 286-5735
> Email: Ernest.Knox@searshc.com<mailto:Ernest.Knox@searshc.com>
> Blackberry:
>
2244650553@messaging.sprintpcs.com<mailto:2244650553@messaging.sprintpcs.com>
> Informix Email: ifmxdba@searshc.com<mailto:ifmxdba@searshc.com> and Team:
> InformixDBA@searshc.com<mailto:InformixDBA@searshc.com>
> Informix Primary:
>
INFORMIXDBAPrimaryPager@searshc.com<mailto:INFORMIXDBAPrimaryPager@searshc.com>
> Informix Secondary:
>
INFORMIXDBASecondaryPager@searshc.com<mailto:INFORMIXDBASecondaryPager@searshc.com>
> MySQL Email: MYSQLDBAe@searshc.com<mailto:MYSQLDBAe@searshc.com> and Team:
> MySQLDBA2@searshc.com<mailto:MySQLDBA2@searshc.com>
> MySQL Primary:
> MYSQLDBAPrimaryPager@searshc.com<mailto:MYSQLDBAPrimaryPager@searshc.com>
> MySQL Secondary:
>
MYSQLDBASecondaryPager@searshc.com<mailto:MYSQLDBASecondaryPager@searshc.com>
>
> For more information, view our DBA Wiki page link below:
>
>
http://wiki.intra.sears.com/confluence/display/TechStrag/Database+Management#DatabaseManagement<http://wiki.intra.sears.com/confluence/display/TechStrag/Database+Management>
>
> " Yes we can make a Change! "> " IF you can think it, you can do it! "> " IT'S always a great day to watch Sports: FOOTBALL "> GSU
> MISSION:
> " The focus of my life begins at home with family, loved ones, and friends.
I
> want to use my resources to create a
> secure environment that fosters love, learning, laughter, and mutual
success.
> I will protect and value integrity. I
> will admit and quickly correct my mistakes. I will be a self-starter. I will
> be a caring person. I will be a good listener
> with an open mind. I will continue to grow and learn. I will facilitate and
> celebrate the success of others. ">
>
***********
>
> This message, including any attachments, is the property of Sears Holdings
> Corporation and/or one of its subsidiaries. It is confidential and may
contain
> proprietary or legally privileged information. If you are not the intended
> recipient, please delete it without reading the contents. Thank you.
>
>
>
>
>
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30202]
*******************************************************************************
↧
↧
Re: write cron jobs to check status
Hi,
something like:
#!/bin/sh
export INFORMIXSERVER=xxxx
export INFORMIXDIR=blabla
export ONCONFIG=onconfig.yyy
/opt/informix/bin/onstat - | grep -q On-Line
EXITSTATUS=$?
if [ ${EXITSTATUS} -gt 0 ]
then
echo "IDS is not online" | mail -s "IDS status" xyz@test.com
fi
Depends on your mail package how to send a text mail. This is an example from
a Linux system.
Hope this helps.
Marcus Haarmann
----- Ursprüngliche Mail -----
Von: "PUSHPA KUMARA"<pushpa@cybersoft.lk>
An: ids@iiug.org
Gesendet: Montag, 6. Mai 2013 12:53:03
Betreff: Re: RE: write cron jobs to check status [30199]
Hi,
thanks for the reply, what will happen when it down and how could know whether
it down or up and if down send a mail
thanks
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30203]
*******************************************************************************
↧
Re: write cron jobs to check status
Careful with that "-q". Solaris, for one, does not support it in the =
standard grep, you have to use the xpg4 version of it.
j.
On May 6, 2013, at 7:16 AM, Marcus Haarmann wrote:
> Hi,=20
>=20
> something like:=20
>=20
> #!/bin/sh=20
>=20
> export INFORMIXSERVER=3Dxxxx=20
> export INFORMIXDIR=3Dblabla=20
> export ONCONFIG=3Donconfig.yyy=20
>=20
> /opt/informix/bin/onstat - | grep -q On-Line=20
>=20
> EXITSTATUS=3D$?=20
>=20
> if [ ${EXITSTATUS} -gt 0 ]=20
> then=20
> echo "IDS is not online" | mail -s "IDS status" xyz@test.com=20
>=20
> fi=20
> Depends on your mail package how to send a text mail. This is an =
example from=20
> a Linux system.=20
>=20
> Hope this helps.=20
>=20
> Marcus Haarmann=20
>=20
> ----- Urspr=FCngliche Mail -----=20
>=20
> Von: "PUSHPA KUMARA"<pushpa@cybersoft.lk>=20
> An: ids@iiug.org=20
> Gesendet: Montag, 6. Mai 2013 12:53:03=20
> Betreff: Re: RE: write cron jobs to check status [30199]=20
>=20
> Hi,=20
>=20
> thanks for the reply, what will happen when it down and how could know =
whether=20
> it down or up and if down send a mail=20
>=20
> thanks=20
>=20
>=20
> =
**************************************************************************=
*****=20
> =20
>=20
>=20
> =
**************************************************************************=
*****=20
> =20=
>=20
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30204]
*******************************************************************************
↧
Re: write cron jobs to check status
Hi,
will work without -q, exitstatus is set either way.
Marcus Haarmann
----- Ursprüngliche Mail -----
Von: "Jack Parker"<jack.parker4@verizon.net>
An: ids@iiug.org
Gesendet: Montag, 6. Mai 2013 13:19:36
Betreff: Re: write cron jobs to check status [30204]
Careful with that "-q". Solaris, for one, does not support it in the =
standard grep, you have to use the xpg4 version of it.
j.
On May 6, 2013, at 7:16 AM, Marcus Haarmann wrote:
> Hi,=20
>=20
> something like:=20
>=20
> #!/bin/sh=20
>=20
> export INFORMIXSERVER=3Dxxxx=20
> export INFORMIXDIR=3Dblabla=20
> export ONCONFIG=3Donconfig.yyy=20
>=20
> /opt/informix/bin/onstat - | grep -q On-Line=20
>=20
> EXITSTATUS=3D$?=20
>=20
> if [ ${EXITSTATUS} -gt 0 ]=20
> then=20
> echo "IDS is not online" | mail -s "IDS status" xyz@test.com=20
>=20
> fi=20
> Depends on your mail package how to send a text mail. This is an =
example from=20
> a Linux system.=20
>=20
> Hope this helps.=20
>=20
> Marcus Haarmann=20
>=20
> ----- Urspr=FCngliche Mail -----=20
>=20
> Von: "PUSHPA KUMARA"<pushpa@cybersoft.lk>=20
> An: ids@iiug.org=20
> Gesendet: Montag, 6. Mai 2013 12:53:03=20
> Betreff: Re: RE: write cron jobs to check status [30199]=20
>=20
> Hi,=20
>=20
> thanks for the reply, what will happen when it down and how could know =
whether=20
> it down or up and if down send a mail=20
>=20
> thanks=20
>=20
>=20
> =
**************************************************************************=
*****=20
> =20
>=20
>=20
> =
**************************************************************************=
*****=20
> =20=
>=20
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30205]
*******************************************************************************
↧
Re: CDR Issue
What is strange is this has now happened 3 times in the past couple of
months ... Always on a Saturday night, always a couple of hours after a
reboot. Nothing has changed with the databases and from what I'm told no
new jobs are executing and the data volumes are the same.
One thing I still have to check out is that I believe they may have moved
a couple of the servers from Fiber Channel adapters to virtual IO cards
.... which I fought and lost ... might something like that cause this?
Peter Logan
Senior Database Administrator
Phone: 616/878-8309
From: "Paul Watson"<paul@oninit.com>
To: ids@iiug.org,
Date: 05/05/2013 01:15 PM
Subject: Re: CDR Issue [30195]
Sent by: ids-bounces@iiug.org
You are out of or cdr thinks you are close to being out of logspace
Cheers
Paul
Paul Watson
+1 913-387-7529
www.oninit.com
On May 5, 2013, at 0:26, "Peter_Logan@spartanstores.com"<Peter_Logan@spartanstores.com> wrote:
> Aix 6.1
> IDS 11.70.fc3X9
>
> I got the below message tonight in my online log. about 2 hours later I
> got a second message showing that the snooping was complete and the
users
> were unblocked. What sort of thing might cause this to happen?
>
> Peter
>
> Peter Logan
> Senior Database Administrator
> Phone: 616/878-8309
> ----- Forwarded by Peter Logan/Corporate/Spartan on 05/05/2013 01:22 AM
> -----
>
> From: informix (spartan42) <informix@spartan42.spartanstore.com>
> To: pdllogan77@yahoo.com, peter_logan@spartanstores.com,
> Date: 05/04/2013 11:57 PM
> Subject: Re:
>
> Subject: ods_prd_tcp : Attention! : DDR Subsystem notification.
> To: peter_logan@spartanstores.com
> cc: pdllogan77@yahoo.com
>
> DDR Log Snooping - DDRBLOCK phase started, userthreads blocked
>
>
>
>
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30206]
*******************************************************************************
↧
↧
RE: write cron jobs to check status
Also the return code from onstat is 5 when the server is online and stand
alone.
Art
On May 6, 2013 6:45 AM, "Alexandre Marini"<alexandre@briug.org> wrote:
> Hello.
> You could easily get your Informix status from the output of "onstat -"> command.
> Eg: in linux/unix boxes, you could check using:
> onstat - |awk '{print $8}'>
> That should return "On-Line", in other case your system should not ready
> for
> users sessions/applications.
>
>
>
>
http://pic.dhe.ibm.com/infocenter/informix/v121/topic/com.ibm.adref.doc/ids_adr_0489.htm?resultof=%22%73%65%72%76%65%72%22%20%22%73%74%61%74%75%73%22%20%22%73%74%61%74%75%22%20
>
> Pay attention to single-user mode, while the engine is running, but not
> available for non-administrative users.
>
> Hope it helps.
> Regards.
>
> Alexandre Marini
> IBM Informix Certified Professional v10 / v11.50 / v11.70
>
> IBM Information Management Informix Technical Professional
>
> IBM Infosphere DataStage Technical Professional
> Informix Senior DBA - Orizon Brasil
> BRIUG website administrator
> Informix independent consultant
>
> > To: ids@iiug.org
> > From: pushpa@cybersoft.lk
> > Subject: write cron jobs to check status [30197]
> > Date: Mon, 6 May 2013 05:49:21 -0400
> >
> > Hi,
> >
> > i need to write script and create cron job to check the informix server
> status
> > and need to email it to some one's email any one can help me to do this
> >
> > Thanks
> >
> >
> >
>
>
> >
> >
>
>
>
>
>
>
>
--047d7b342ba4f0167504dc0c6e2e
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30207]
*******************************************************************************
↧
Sys Tables
Hi everyone. May I run shrink and repack in catalogs table (tabid <= 99)
Thanks,
André Luiz Rufino
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30208]
*******************************************************************************
↧
Why Do I Need SBSPACE
The following e-mail was sent to you via IDS Forum from Dan Mueller (ddmueller@intercall.com) at IP address 75.78.103.8.
Why Do I Need SBSPACE
Art,
I have heard you hammer this home before but for the life of me I cannot remember the reasoning. So, at the risk of peril to my ego...
Why should I create an SBSPACE in an instance that does not use smart blobs? Also, should I create a temp SBSPACE as well?
Thanx,
Dan
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: []
*******************************************************************************
↧
NOSQL and informix
Hi -
At the 2013 iiug conference we saw a presentation about NOSQL and informix. I
can't remember (or seem to find) whether or not those features are in version
12.1, or if they're coming in a subsequent release?
Anyone have any inside info?
Thanks in advance,
Sierra
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30209]
*******************************************************************************
↧
↧
RE: CDR Issue
Peter
Look in the the syscdr_ddr table, ddrblock is triggered if you are heading
for a log wrap
If the engine is approaching ddrblock then you should also see spooler
threads that will spool transactions to disk, this should allow the replay
position to advance. If ER reaches the point that all the dd_logpage2block
are exhausted then you will be get a DDRBLOCK.
You minimize the likelihood of a DDRBLOCK by setting the LTX watermarks to
say 35/45 (LTXHWM ~25/35% of LTXEHWM)
You can also look at CDR_MAX_DYNAMIC_LOGS - 0 is off, -1 is unlimited,
positive integer is the max that can added.
With ER you really can't have too many logs :)'
Cheers
Paul
-----Original Message-----
From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of
Peter_Logan@spartanstores.com
Sent: Monday, May 06, 2013 7:10 AM
To: ids@iiug.org
Subject: Re: CDR Issue [30206]
What is strange is this has now happened 3 times in the past couple of
months ... Always on a Saturday night, always a couple of hours after a
reboot. Nothing has changed with the databases and from what I'm told no
new jobs are executing and the data volumes are the same.
One thing I still have to check out is that I believe they may have moved
a couple of the servers from Fiber Channel adapters to virtual IO cards
..... which I fought and lost ... might something like that cause this?
Peter Logan
Senior Database Administrator
Phone: 616/878-8309
From: "Paul Watson"<paul@oninit.com>
To: ids@iiug.org,
Date: 05/05/2013 01:15 PM
Subject: Re: CDR Issue [30195]
Sent by: ids-bounces@iiug.org
You are out of or cdr thinks you are close to being out of logspace
Cheers
Paul
Paul Watson
+1 913-387-7529
www.oninit.com
On May 5, 2013, at 0:26, "Peter_Logan@spartanstores.com"<Peter_Logan@spartanstores.com> wrote:
> Aix 6.1
> IDS 11.70.fc3X9
>
> I got the below message tonight in my online log. about 2 hours later I
> got a second message showing that the snooping was complete and the
users
> were unblocked. What sort of thing might cause this to happen?
>
> Peter
>
> Peter Logan
> Senior Database Administrator
> Phone: 616/878-8309
> ----- Forwarded by Peter Logan/Corporate/Spartan on 05/05/2013 01:22 AM
> -----
>
> From: informix (spartan42) <informix@spartan42.spartanstore.com>
> To: pdllogan77@yahoo.com, peter_logan@spartanstores.com,
> Date: 05/04/2013 11:57 PM
> Subject: Re:
>
> Subject: ods_prd_tcp : Attention! : DDR Subsystem notification.
> To: peter_logan@spartanstores.com
> cc: pdllogan77@yahoo.com
>
> DDR Log Snooping - DDRBLOCK phase started, userthreads blocked
>
>
>
****************************************************************************
***
>
****************************************************************************
***
****************************************************************************
***
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30210]
*******************************************************************************
↧
Re: Migration from AIX to Linux
We use a mixture of AIX and Linux. Most systems are running RHEL on IBM
hardware. It works beautifully - had no issues.
AIX hardware tends to be big-endian whereas Linux hardware tends to be
little-endian. This has meant extra steps for us when we convert from one to
the other.
Ray.
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30211]
*******************************************************************************
↧
Re: write cron jobs to check status
Hi ALL,
thanks for all to help me
Thanks
*******************************************************************************
To post a response via email (IIUG members only):
1. Address it to ids@iiug.org
2. Include the bracketed message number in the subject line: [30212]
*******************************************************************************
↧
More Pages to Explore .....